Last week, I traveled to the Houston Area Safety Council in Pasadena, Texas, to put Industrial Training International VR’s new crane simulator through its paces. While ITI has been training crane operators, riggers, and signallers for 30 years, the inclusion of VR in their training programs is a recent development. To test the effectiveness of their VR crane simulator ITI offered to let me—someone who has never operated heavy machinery in their life—spend an hour training with the system and then apply what I learned to operating an actual crane.


Guest Article by Eric Liga

eric-ligaEric is the co-founder and co-organizer of the HoustonVR Meetup, and an event manager for the Immersive Technology Conference. He was the VR technical adviser for the VR Pain and Anxiety Management pilot program at Memorial Hermann Prevention and Recovery Center, and has been actively involved in the VR scene since the 2012 Oculus Kickstarter. He has been a professional computer programmer for over 20 years.


Unlike traditional simulators, which physically replicate a crane’s cab, surrounded by oversized monitors, ITI’s VR crane simulator is compact and rather modest looking. A laptop outfitted with a GTX 1070 drives output to an Oculus Rift, and a metal bracket with four joysticks (interchangeable to match a range of crane brands and models) attaches to any available table using a pair of clamps. The simulator weighs 30 lbs and packs neatly into a rolling Pelican case (at a total of 68lbs) for transport, making it reasonable to take the simulator to on-site locations for training or evaluation of job candidates.

iti vr crane simulator (3)ITI plans to sell the hardware elements of its crane simulator at-cost (a fraction of the $100k starting price of most traditional crane simulators), plus a yearly software license fee. Access to upcoming features, including new types of cranes (such as Overhead Cranes) and multi-user scenarios, is included in the licensing cost. Simulators will allow networking to support scenarios with multi-crane lifts and integrated training of signal people outfitted with VR hand-trackers.

iti vr crane simulator (4)If haptic feedback is desired, the “Motion Base” model of the simulator includes a platform with hydraulic lifts at each corner and bass transducers to simulate engine rumble. This version of the simulator wasn’t available to demo, but I tested an equivalent base integrated into ITI’s Aerial Work Platform simulator. In that capacity, it did a fine job of adding to the sensation of “actually being there.” At 400 lbs, the inclusion of the base would negate many of the simulator’s advantages in compactness and portability, but in a permanent installation, it could add nicely to the experience.

Paired with a monitor instead of a VR HMD, the simulator was functional, if unexceptional. Adding in the VR headset, however, moved the experience into a different category. The addition of depth perception made understanding the motion of the crane’s distant chain far easier, and being able to glance up to check the boom tip, or lean around to check mirrors made the experience much more comparable to actually operating a crane.

Having never operated a crane before, let alone any type of heavy machinery, a number of the required skills turned out to be neither easy nor intuitive for me, and my initial forays in the simulator were less than promising. Suspended loads swung perilously close to signalmen or knocked over boxes and barrels. Virtual overseers chided me for taking too long or setting down loads too hard. By this point, Caleb Steinborn, ITI’s Product Manager of VR Simulations, may have begun to regret ever offering to let me operate a real 22 ton crane after the VR training.

One challenge for me was “booming up and lowering the load.” This involved maintaining the cargo at a set height while angling the boom arm up. Imagine the motion of a lure at the end of a fishing line: when you angle the fishing pole up, the dangling lure moves up with it. On a crane, an operator must extend the chain (hoist) at the same rate as the boom would be raising it, to keep the load level while maneuvering the boom at the same time. This may also need to be done while rotating the boom, in which case the operator must manage two joysticks with one hand and a third joystick with the other.

iti vr crame simulator software (2)Another task, even more challenging for me, was “catching the swing.” Once the crane arm stops moving, momentum will cause the suspended load to continue on its path, setting the chain into a 1 or 2-axis swing. To stabilize the load, the crane operator must then move the boom arm to follow the load’s center of gravity, overshooting slightly at the end of the swing in each direction, to compensate for momentum and keep the load stable.

While the simulator’s full training sequence includes over 18 hours of content, I only sampled one or two scenarios from each unit, completing a heavily abbreviated course in just under an hour. The final test, a simulation of the National Commission for the Certification of Crane Operators Z-Corridor Practical Exam, required me to guide a suspended barrel through a zig-zag corridor lined with tennis balls balanced on poles. Knock a ball off of a pole? You fail the test. Bump the ground with the barrel, or raise it higher than the short length of chain trailing below it? You fail the test. Take longer than 4 minutes to complete the task? Fail.

iti vr crame simulator software (1)Did I pass? Well… no. I did make it perhaps three quarters of the way through the course before failing, though. This seemed to satisfy the training supervisor that I could perform some basic operations on a real crane—under supervision—safely. So after some hurried consultation with the higher-ups at HASC, our small group was loaded into a golf cart and whisked out to meet the 22 tons of yellow-painted metal which I would now attempt to operate.

iti vr crane simulator (7)Rather nervously, I climbed up onto the crane, clambered awkwardly into the cab, and listened as Amanda Jordan, the ITI Houston Branch Regional Director, gave me a run-down of the this specific crane’s control scheme. Within a minute or two, I had adapted to the new set of levers and pedals and had the “headache ball” crane hook at the end of the hoist gliding in various directions around the testing area.

Could I “boom up and lower the load”? Yes.

Could I “catch the swing”? Yes.

iti vr crane simulator (1)Could I maneuver a suspended barrel through a tricky obstacle course? Well… probably not. And I didn’t try. But I did feel confident that more time spent in the simulator would bring my abilities up to snuff. And the simulator did a superb job of replicating the experience of operating an actual crane—an assessment which appeared to be shared by a handful of crane operators and trainers we convinced to stop in for a moment to run through a test scenario or two.

It’s worth noting that ITI’s development partner, Edmonton-based Serious Labs, took the software side of ITI’s crane simulator from concept to final product in 8 months. Doubtless, this was aided by the ability to reuse assets from other simulators (the Aerial Work Platform simulator shared much of the same environment), but the end result was impressive nonetheless.

ITI’s VR crane simulator will officially debut at ConExpo in Las Vegas and will begin shipping to clients in the latter half of March.


Photography by William Golden, Director of the Immersive Technology Conference.

Newsletter graphic

This article may contain affiliate links. If you click an affiliate link and buy a product we may receive a small commission which helps support the publication. More information.


  • J.C.

    I’m surprised I’m the first to comment on this, as this is one of the most unique articles on here. Clearly the use of VR for training purposes on construction equipment works quite well. Had you JUST used the simulator, this article would have been pretty pointless…but verifying that the (admittedly abbreviated) training transferred to real world use is awesome. I don’t see how this would help with non-vehicular training, but construction uses a lot of unique vehicles. I’m assuming the developer is working toward training on several vehicle types, each with the proper-feeling controls.

    It’s a nice reminder that VR has very legitimate uses outside of gaming.

    • Jason

      It’s also one where the costs of VR development are probably quite small compared to the cost of damage to incredibly expensive equipment due to having to mostly train on-the-job. Even just savings on wear and tear is probably significant.

  • Interesting article, and fascinating how many things there are to think about when operating a crane which are not apparent from just watching. Operating three sticks at once? Are they one or two axis?

    To be honest I would love to try things like this, and to experience the transition of skills from virtual reality to actual reality, very neat :)

  • mrtexasfreedom

    This is a terrific article. Thank you for sharing this experience. I wish there was video footage of the author operating the actual crane.

    I bet insurance companies will offer reductions on premiums if operators are periodically certified on simulators like this. The savings on those premiums would easily pay for cost of licensing the software, etc.

    • Niraj Kumar

      Hey MrTexasfreedom You are right I see many people are making backlink from this artidcle. And really this article is terrific.

      I am also a blogger form India I run my blog Nirajforhelp.com since 2017

      You can check out my blog.

  • Behram Patel

    As everyone mentioned…Fantastic Article ! Do More.
    So many things to learn about operating heavy metal ;)

    Cheers and hope to see you write more content here.
    b

  • UP Yojana

    Great Article Bro ! I am big fan of your writing skill and Regular visit to your Blog.
    I am also a Blogger, I am from Uttar Pradesh and I write & share Articles about Uttar Pradesh Government Scheme on my Blog Uttar Pradesh Government Scheme Related Information in Hindi

  • Big Update: Indian Prime Minister Narendra Modi will talk to the farmers through Doordarshan on 09 August 2021 and will also release the 9th installment of Kisan Samman Nidhi Yojana on the same day at 12:30 pm.

    If you also want to Check PM Kisan Payment Status.

    So follow the steps given below.

    Visit the website of PM Kisan Yojana
    Click on Beneficiary Status.
    Enter Aadhar Number or Mobile Number
    Click on Get Data button
    PM Kisan Samman Nidhi Yojana Payment Status in front of you

  • Ajneesh Rathour

    Free domain name checker, shopify domain name generator, wedding domain name generator

    Generate thousands of Domain name ideas, find suggestions and check availability instantly. Check multiple TLDs and filter by industry.

    Generate domain name ideas for your business and instantly check availability. It’s easy to find the perfect domain for your brand.

    Find the right domain name for your website. A simple tool that identifies catchy domains available and gives you the tools to register them on the spot.

    Generate domain names, app names, website names, and business names online . See suggestions based on related words, translations, alternate spellings.

  • Ajneesh Rathour

    iti course ke liye yah best website he. ITI- Industrial Training Institute is a Technical course one can join after successful completion of class 10th or Matriculation. ITI is a great course for students who want to do a professional technical course in the short term. Learn free iti course, iti notes , study material, PDF and more content for iti trainee only on iticourse.com